Garage Door Cable Repair in Frankston, TX | Garage Door USA
from $149
Garage Door Garage Door Cable Repair Frankston, TX
Lift-cable replacement, drum re-spooling, and tension recalibration. We pair new cables with a spring inspection so the door is safe and balanced before we leave.
Garage Door Garage Door Cable Repair Frankston, TX
Our garage door cable repair service covers all of Frankston: Frankston and the surrounding area. Set in Texas's humid subtropical region, these doors face high year-round humidity that rusts springs, cables, and fasteners, morning condensation that collects on cold metal hardware, and frequent thunderstorms that drive rain into tracks and seals, and we plan every repair around it.
Frankston's weather writes the maintenance schedule. With a humid subtropical climate — long, hot, muggy summers, mild winters, heavy thunderstorms, and high year-round humidity, doors here face high year-round humidity that rusts springs, cables, and fasteners, morning condensation that collects on cold metal hardware, and frequent thunderstorms that drive rain into tracks and seals — and we stock the parts that stand up to it.
Across Anderson County, the garage door problems we see again and again are rusted bottom brackets on damp slabs, degraded weatherstripping from UV and moisture, swollen, sticking wood doors in summer humidity, and moisture-tripped openers and sensors after storms. If that sounds like your door, there's a good chance we can fix it today.
Lift cables transfer the spring's stored energy to the door panels — they're under high tension every cycle and degrade slowly through fraying, corrosion, and mis-spooling on the drum. A cable repair visit replaces both cables (always replace as a pair so the door stays balanced), re-spools the drums to the correct number of wraps, recalibrates spring tension to match, and inspects related components like the bottom bracket where one end of each cable terminates.
Cables are galvanized aircraft-grade steel — typically 1/8-inch diameter for residential doors and 3/16-inch for heavier or commercial doors. We carry both diameters along with the bottom-bracket fittings, drum caps, and shaft set-screws that occasionally need replacement alongside the cables.
Cable failure usually leaves the door off-track or hanging crooked. Continuing to operate the opener after one cable has snapped causes the other side to take the full load and is the fastest way to bend tracks or damage panels. Stop the opener and call for repair when you see a frayed or snapped cable — fast service is standard.
Strands of steel poking out of the cable indicate active wear. Cables don't self-heal — frays accelerate to snap.
Door hangs crooked when closed
If one corner is higher than the other when the door is fully down, one cable has stretched, slipped on the drum, or partially failed.
Snapped cable, door stuck
A fully snapped cable leaves the door off-track or jammed. Don't try to force it — call for repair.
Rust streaks on cables
Coastal homes see cable corrosion progress until the strands weaken. Visible rust means the cable is no longer at full strength.
Loud bang followed by crooked door
Cable snap sounds similar to spring snap but is usually quieter. If the door is crooked after the noise, suspect cable failure.
Common causes & what we fix
Mis-spooled drum
When a cable jumps off its drum groove, it crosses over itself and wears at the crossover point. Re-spooling fixes the spool but the wear point becomes the weak link.
Drum cap or set-screw failure
If the drum slips on the shaft, one cable unwinds while the other tries to hold. This sudden imbalance can snap the loaded cable.
Bottom bracket failure
The bracket where the cable attaches at the door bottom occasionally cracks or pulls free, letting the cable whip free under tension.
Coastal corrosion
Salt-air pitting on uncoated cables can drop tensile strength 30–40% over 10+ years. Galvanized aircraft cables resist this far better.
Spring imbalance
An over- or under-tensioned spring puts uneven load on the cables and accelerates wear on the loaded side.
Our process
1
Call or schedule online. Book your garage door cable repair in Frankston online or by phone and pick a 2-hour window. We confirm in under 5 minutes with the assigned tech's name and photo.
2
On-site diagnosis. Step two is an honest garage door cable repair diagnosis at your home — free for most repairs, $39 on minor calls (refunded if you proceed) — so you approve the fix with eyes open.
3
Flat-rate quote. A written flat-rate garage door cable repair estimate comes before the wrenches do. Because techs are salaried, there's no incentive to pad the job — what's quoted is what's charged.
4
Same-visit fix. Garage door cable repair in Frankston is typically one-and-done, backed by a 96% first-call fix rate. We test the door with you and clean up fully before we leave.
How much does garage door cable repair cost in Frankston, TX?
Garage Door Cable Repair cost in Frankston starts from $149. We present a flat-rate written estimate first, honor senior and military discounts, and offer Synchrony financing at 0% APR for 12 months on qualifying projects over $1,500. We keep garage door cable repair affordable across Frankston, TX — one flat number quoted up front, the same one you pay at the end.
Garage Door Cable Repair the United States starts at from $149, with Frankston garage door cable repair priced flat-rate and written out before work starts — what you approve is what you pay, with no add-ons. Seniors (65+) and military save 10% on labor, and Synchrony financing runs 0% APR for 12 months on jobs over $1,500, no prepayment penalty.
Why homeowners in Frankston, TX choose us for garage door cable repair
For garage door cable repair, Frankston trusts a crew that knows Texas's humid subtropical region and backs its work for ten years — salaried techs, flat-rate quotes good for 30 days, and same-visit fixes 96% of the time. We're the garage door cable repair company Frankston calls first — CSLB-licensed, insured, and based right here in Anderson County.
We guarantee garage door cable repair workmanship for 10 years, held separate from whatever warranty the manufacturer puts on the parts. If our garage door cable repair fails on the install, we come back and correct it free for a decade. Springs rated for 30,000 cycles carry a lifetime warranty for the original homeowner; everything else is covered 1–5 years by item.
We keep garage door cable repair honest two ways — honest sizing and honest scope. There's no up-sell because the techs are salaried, not commissioned, and the diagnostic shows you precisely what we see, parts in good shape included. Repair or replace, we recommend whichever wins long-term, and the garage door cable repair quote is flat-rate, written, and valid 30 days.
Areas we serve for garage door cable repair
We provide garage door cable repair throughout Frankston, TX and the surrounding Anderson County area. Serving Frankston and surrounding neighborhoods.
For garage door cable repair we treat all of Anderson County as home turf. Anderson County is part of Texas, and we cover it end to end, including Berryville, Shadybrook, Bullard, and Jacksonville.
Frankston sits close to Berryville, Shadybrook, Bullard, and Jacksonville, and we treat the whole cluster as one garage door cable repair area — the same licensed crew from any of them. Need garage door cable repair near 75763? It's on the daily Anderson County loop, dispatched to the closest stocked truck.
Garage Door Cable Repair near you in Frankston, TX
Frankston searches for garage door cable repair near me land on us because we're built local: salaried techs who know the area, flat-rate quotes, and coverage that runs continuously from Frankston out through Berryville, Shadybrook, Bullard, and Jacksonville.
Frankston is part of our greater Garland, TX metro service area.
75763 and the surrounding blocks are all on our garage door cable repair map. ETAs for garage door cable repair shift with Frankston traffic through the day; call and we'll quote the honest arrival window on the spot. You reach an on-call technician, not an answering machine. For local garage door cable repair in Frankston, TX, including 75763, we route the nearest stocked truck straight to your door.
Frequently asked about garage door cable repair
Top questions homeowners searching for Garage Door Cable Repair near me ask us:
Local weather drives most of the repairs we run in Frankston: with humid subtropical climate — long and high year-round humidity that rusts springs, cables, and fasteners, morning condensation that collects on cold metal hardware, and frequent thunderstorms that drive rain into tracks and seals, the common failure modes are rusted bottom brackets on damp slabs, degraded weatherstripping from UV and moisture, swollen, sticking wood doors in summer humidity, and moisture-tripped openers and sensors after storms. Our Frankston trucks stock the parts those conditions wear out first, so most jobs are a single visit.
The median Frankston home dates to 1978, with 54% of the stock built before 1980 — a real mix of original and already-replaced doors, which is why we quote repair-versus-replace honestly on every call.
Cables on a balanced door wear at the same rate. The second cable is days to weeks behind the first. Replacing both at once is faster, cheaper than two visits, and properly re-balances the door.
No — running the opener with a failed cable bends tracks and risks the door coming off the rail entirely. Disconnect the opener and avoid using the door until repair.
5 years on cables and drums. 10-year workmanship on the install. Galvanized cables in coastal homes typically last well beyond it.
Cable repairs are quoted flat-rate before starting; the figure depends on whether the drums or a bottom bracket also need replacement. No surprises once you approve the written quote.